Starting to add systemd support.

[breezed.git] / README.txt

diff --git a/README.txt b/README.txt
index 13f583f..50e84cb 100644 (file)
--- a/README.txt
+++ b/README.txt
@@ -1,22 +1,27 @@
 
    Breezed is a small daemon to control the speed of the fan,
-   depending on the current temperature of the computer. I have tested
-   it only on a Thinkpad X61s and T420s.
+   depending on the current temperature of the computer.
+
+   DISCLAIMER: I have tested it only on my Thinkpads X61s, T420s, and
+   T450s with Debian stable.
 
  * INSTALLATION
 
    Before installing, you must have a configuration file in
    /etc/breezed.conf.
 
-   Two are currently provided in the archive, and they use the
-   settings *I* picked for my Lenovo X61s and T420s. I have no idea if
-   these settings are safe on these laptops (I guess so, since I have
-   been using them for years on both), and I suspect they are not safe
-   for another laptop. If you want to give it a try, just do
+   Three are provided in the archive, and they use the settings *I*
+   picked for my Lenovo Thinkpads. I have no idea if these settings
+   are safe on these laptops -- I guess so, since I have been using
+   them for years on both -- and I suspect they are not safe for
+   another laptop.
+
+   If you want to give it a try, just copy of the configuration file,
+   e.g.
 
      cp breezed_Lenovo_X61s.conf /etc/breezed.conf
 
-   Then, you can install the daemon simply with
+   Then install the daemon simply with
 
      make install
 
@@ -24,15 +29,17 @@
 
      make uninstall
 
+   Use respectively install-systemd and uninstall-systemd to install
+   it for systemd.
+
    See the man page for details about the algorithm, arguments and
    configuration file.
 
  * NOTES
 
    On Thinkpads you have to allow the module thinkpad_acpi to set the
-   fan speed, which is not allowed by default in Debian. To do so, you
-   have to have a file /etc/modprobe.d/thinkpad_acpi.modprobe
-   containing
+   fan speed, which is not allowed by default in Debian. To do so, add
+   a file /etc/modprobe.d/thinkpad_acpi.conf containing
 
    ---------------------------- snip snip -------------------------------
    options thinkpad_acpi fan_control=1
@@ -40,4 +47,4 @@
 
 --
 Francois Fleuret (francois@fleuret.org)
-April 2009 (minor updates Jan 2012, Jul 2013)
+Nov 2015