-Every 5s, this daemon gathers all integer values from the thermal
-files, and keep the max as the overall computer temperature T. It then
-pick the highest temperature threshold lower than T and set the fan
-speed to the corresponding level. To avoid oscillations, T has to be
-two degrees below threshold to reduce the temperature. Also, the
-daemon waits for at least 30s after any change of the fan speed before
-reducing it. The fan speed is set by writing "level %d" into the
-specified fan file.
+Every 5s, \fBbreezed\fP gathers all integer values from the thermal
+files, and takes the max as the overall temperature T. It then
+computes the highest fan speed whose temperature threshold is lower
+than T. If that speed is above the current speed, the daemon changes
+the fan speed accordingly. Otherwise it computes the lowest fan speed
+whose temperature threshold is two degrees above T, and sets the fan
+speed one level below. This two degree gap avoids too many
+oscillations. Also, the daemon waits for at least 30s after any change
+of the fan speed before reducing it. The fan speed is set by writing
+"level <level>" into the specified fan file.