automatic commit

diff --git a/breezed.1 b/breezed.1
index 7a7e3bd..af84fd9 100644 (file)
--- a/breezed.1
+++ b/breezed.1
@@ -52,18 +52,25 @@ at /etc/breezed.conf
 
 .SH "EXAMPLES"
 
-A typical way of starting breezed is
+If a configuration file exists, the standard way to start breezed is
+to run it without arguments.
 
-breezed --thermal-files /proc/acpi/thermal_zone/THM0/temperature,/proc/acpi/thermal_zone/THM1/temperature \
+Starting it with all the arguments on the commande line can be done
+for instance with
+
+breezed --no-configuration-file \
+ --thermal-files /proc/acpi/thermal_zone/THM0/temperature,/proc/acpi/thermal_zone/THM1/temperature \
  --fan-file /proc/acpi/ibm/fan \
  --temperature-thresholds 52,54,56,58,60,62,64
 
 which specifies that when the temperature raises above 52C, the fan
 level should be 1, when the temperature raises above 54C it should be
-2, etc. The maximum speed level 7 should be chosen for temperature
-above 64C. Due to the two degrees gap between the thresholds to
-increase and thresholds to decrease the temperature, it will for
-instance remains at speed 1 until the temperature goes down to 50C.
+2, etc. The maximum speed level 7 should be chosen for temperatures
+above 64C.
+
+Due to the two degrees gap between the thresholds to increase and the
+thresholds to decrease the temperature, it will for instance remains
+at speed 1 until the temperature goes down to 50C.
 
 Because it takes into account all the values found in the thermal
 files, you can use as well /proc/acpi/thermal_zone/THM?/temperature or
@@ -71,6 +78,6 @@ files, you can use as well /proc/acpi/thermal_zone/THM?/temperature or
 
 .SH "AUTHOR"
 .PP
-Written by Francois Fleuret <francois@fleurer.org>. Permission is
+Written by Francois Fleuret <francois@fleuret.org>. Permission is
 granted to copy, distribute and/or modify this document under the
 terms of the GNU GPL.